lab01 : FtoC and CtoF with test cases
|lab01||true||FtoC and CtoF with test cases||Tue 10/10 08:00AM||Fri 10/13 05:00PM|
In this lab, you’ll practice:
- Creating a file that has some functions in it
- Testing those functions interactively at the Python prompt
- Creating a file of automatic test cases for those functions
- Running those test cases
- Submitting your functions and test cases to submit.cs for grading
Step 0: Install pytest for your account (or on your machine)
This lab is one that you may find you need to do on the CSIL machines.
It’s important to differentiate between the Python shell
>>> vs the terminal
It is probably the case that
pytest is not installed for your version
of Python3. You can check by typing
python3 at the Terminal prompt
to get to the Python Shell Prompt
>>>, and then typing
If you get an error message like this one, then pytest is not installed.
[cgaucho@csil-12 ~]$ python3 Python 3.4.3 (default, Aug 9 2016, 15:36:17) [GCC 5.3.1 20160406 (Red Hat 5.3.1-6)] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import pytest Traceback (most recent call last): File "", line 1, in ImportError: No module named 'pytest' >>> [cgaucho@csil-12 ~]$ pip3 install --user pytest
In order to exit the python shell in terminal press Ctrl+D or type exit() in order to return to the normal terminal.
To install it, type this command into the terminal session (the Unix Terminal prompt) to install pytest for your CSIL account:
pip3 install --user pytest
To install pytest on Windows, see this tutorial
You can also try this command on Mac. It might work, or it might not. If it does—great, then you can do this lab on your own machine. If not, then you’ll need to do it on CSIL.
The output should look something like this:
[cgaucho@csil-12 ~]$ pip3 install --user pytest You are using pip version 7.1.0, however version 9.0.1 is available. You should consider upgrading via the 'pip install --upgrade pip' command. Collecting pytest Downloading pytest-3.2.1-py2.py3-none-any.whl (186kB) 100% 188kB 1.5MB/s Collecting py>=1.4.33 (from pytest) Downloading py-1.4.34-py2.py3-none-any.whl (84kB) 100% 86kB 2.0MB/s Requirement already satisfied (use --upgrade to upgrade): setuptools in /usr/lib/python3.4/site-packages (from pytest) Installing collected packages: py, pytest Successfully installed py pytest [cgaucho@csil-12 ~]$
To tell whether it worked or not, try the
import pytest command again:
[cgaucho@csil-12 ~]$ python3 Python 3.4.3 (default, Aug 9 2016, 15:36:17) [GCC 5.3.1 20160406 (Red Hat 5.3.1-6)] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import pytest >>>
The lack of an error message (just another
>>> prompt) means “it worked!”.
We are going to use the Python prompt in the next step anyway, so just stay
at the Python prompt. (Or if you need to get out of Python, use CTRL-D to return
to the Unix shell prompt.)
Step 0: Warmup–experiencing floating point inaccuracy
If you are not already at the Python prompt, bring up a terminal window, and just type
python3. This should give you the Python Shell Prompt (
>>>) where you can type in some expressions and see the resulting values.
Type in the
import math, followed by
math.sqrt(2). It should look like this:
>>> import math >>> math.sqrt(2) 1.4142135623730951 >>>
The value we get back is the square root of 2, which is an irrational number—its decimal representation goes on forever. Unfortunately, real world computing devices typically store numbers with a finite number of decimal places†. So, the representation we see for the square root of two, is, in fact an approximation.
(† Technically, “binary places”, or “binary digits” rather than “decimal places”. For purposes of this discussion it amounts to the same thing. Also, some computer systems do work with “symbolic” representations of numeric quantities e.g retaning or as symbolic values rather than as numerical approximations. On those systems, you can exact results, without losing precision, at the expense of speed. We won’t discuss that kind of software in this course.)
We can see this if we multiply
math.sqrt(2) by itself. Try it:
>>> math.sqrt(2) * math.sqrt(2) 2.0000000000000004 >>>
See that pesky
4 digit in the ten quadrillionths place? My goodness, we are really, really close to 2.0, but if we ask whether the values are equal, Python says no:
>>> math.sqrt(2) * math.sqrt(2)== 2.0 False
In fact, Python is very clear about the difference between
math.sqrt(2) * math.sqrt(2), and can even tell us
how big that difference is. The
4 digit is only the tip of the very, very, very small iceberg:
>>> math.sqrt(2) * math.sqrt(2)- 2.0 4.440892098500626e-16 >>>
This fact is going to be annoying to us many times. One consequence is that when we test software involving floating point numbers, we must allow for some inaccuracy. This “allowable inaccuracy” is sometimes called the tolerance, and it might be a small value such as
0.001 (1x10-3, or
In Python, we can write
1e-06. (The lowercase
e is the way that Python represents scientific notation.)
You can see that Python, by default, formats numbers in this notation once the fifth decimal place is reached:
>>> 0.01 0.01 >>> 0.0001 0.0001 >>> 0.00001 1e-05 >>> 0.000001 1e-06 >>>
We’ll come back to that idea later in this lab.
As a reminder, CTRL-D gets you out of the Python Shell Prompt (
and returns you to the Unix shell prompt.
Step 1: Make a
In the previous lab, you should already have created the
~/cs8/lab00 You are now going to create folder
~/cs8/lab01 for the files for this lab.
In general, its probably a good idea to keep your work for this class
~/cs8, in folders called
This isn’t exactly required (no-one is going to check), but it’s probably a good habit to develop. Here’s why: all the rest of the instructions will be written based on the assumption that you did things this way. And if you continue to take CS courses at UCSB, you’ll often find that’s the case from one course to the next.
So, I’d strongly encourage you to do it.
As a reminder:
cdreturns you to your home directory (e.g.
pwdprints your current working directory
cd cs8changes into the cs8 directory under the current directory
cd ~/cs8changes into the cs8 directory under your home directory regardless of the current working directory (because
~is a shortcut for the absolute path of your home directory.)
cd ..will move you up one directory from your current directory.
mkdir lab01will create a lab01 directory under your current working directory
lslists the files in your current directory
With that information, you should be able to determine how to
~/cs8/lab01 directory, and make that directory your current
working directory (the one that comes up when you type
pwd.) Do that now.
Then, you are ready for the next step.
Step 2: Create a file called
convert.py in your
The contents of
convert.py should be as shown below. This contains
two Python function definitions that, at the moment are incorrect.
Choose “File => New File” in IDLE to bring up an “untitled” window, then copy and paste this code into that window.
Note that the formulas for converting between Celsius and Fahrenheit are incorrect. That’s deliberate, so just go with it for now. We’ll fix those at a later step.
def fToC(fTemp): return fTemp - 32 # TODO: Fix this line of code def cToF(cTemp): return cTemp + 32 # TODO: Fix this line of code
Step 3: Test your code by hand
To test this code, we’ll first do what many programmers do: test the code by hand.
That is, we’ll run the file in IDLE, and then enter some function calls in the Python shell to see what results we get. These two functions are supposed to convert between Fahrenheit where water freezes at 32 degrees, and Celsius where it freezes at 0 degrees. Let’s see if they work properly.
Use the Run Module command to run the code, and then try entering these function calls at the Python Shell prompt. You should see output similar to what is shown below:
>>> fToC(32) 0 >>> cToF(0) 32 >>>
As you can see, for those two particular values, the function appears to return the correct answer—32 degrees fahrenheit is indeed 0 degrees celsius, and 0 degrees celsius is indeed 32 degrees fahrenheit.
So clearly, testing with a single value is not enough. Indeed, if we test with another well known value, 212 Fahrenheit and 100 Celsius (the boiling point of water), we see that the output is incorrect:
>>> fToC(212) 180 >>> cToF(100) 132 >>>
One of the problems with testing by hand is that it is tedious, and folks have a tendency to skip it. So, experienced programmers have learned that its generally a better idea to automate the process of testing. We’ll learn how to do that next. We’ll see that when we set up these four tests, two of them will pass, and two of them will fail.
Step 4: Setting up automated tests
Add this line at the top of your convert.py file:
Then, add the following code to your
convert.py file after the function definitions for
cToF that defines four automated tests:
def test_fToC_freezing(): assert fToC(32.0)==pytest.approx(0.0) def test_cToF_freezing(): assert cToF(0.0)==pytest.approx(32.0) def test_fToC_boiling(): assert fToC(212.0)==pytest.approx(100.0) def test_cToF_boiling(): assert cToF(100.0)==pytest.approx(212.0)
These are automated tests that use a module known as
pytest. When defining tests using the
pytest module, we typically define functions that:
- have names that start with
test_or end with
- end with exactly one
assertstatement—that is, the keyword
assertfollowed by a boolean expresssion.
If the expresssion after
assert is true, the test passes, otherwise it fails
We are using
pytext.approx() here because any time you are testing with floating point numbers, we have to be aware that there may be some inaccuracy, as we discussed earlier.
(Recall our discussion of what happens when you multiple
math.sqrt(2.0) by itself. Here, its probably overkill since we aren’t using any irrational numbers, but it is still safer to always use some way of approximating equality when dealing with floating point.)
You can click the plus to open a dropdown showing what your entire file should look like at this point:
convert.py so far
import pytest def fToC(fTemp): return fTemp - 32 def cToF(cTemp): return cTemp + 32 def test_fToC_freezing(): assert fToC(32.0)==pytest.approx(0.0) def test_cToF_freezing(): assert cToF(0.0)==pytest.approx(32.0) def test_fToC_boiling(): assert fToC(212.0)==pytest.approx(100.0) def test_cToF_boiling(): assert cToF(100.0)==pytest.approx(212.0)
After entering this, save the file and use “Run Module” to make sure there are no error messages (red output in the Python Shell Window.). If not, then you are ready for the next step.
Step 5: Running the test cases
Running the test cases requires us to go outside of IDLE back to the terminal shell prompt.
Your current directory needs to be the same one that your convert.py file is stored in. That should be
~/cs8/lab01, but if it isn’t, then fix things so that the
convert.py file is in that directory, and you are in that directory. If you need help, ask for assistance.
You should be able to type the
ls command (or on Windows,
dir) at the terminal shell prompt and see the
convert.py file listed:
your-prompt-here $ ls convert.py your-prompt-here $
When that’s the case, try this command:
python3 -m pytest convert.py
You should see output like this. It may be a little overwhelming at first, but don’t let it intimidate you. Once you know what you are looking for, it is very easy to read. After the output, there is a guide to understanding it.
169-231-175-204:lab01 pconrad$ python3 -m pytest convert.py ==================================== test session starts ==================================== platform darwin -- Python 3.6.2, pytest-3.2.1, py-1.4.34, pluggy-0.4.0 rootdir: /Users/pconrad/github/ucsb-cs8/Lecture5_0816/lab01, inifile: collected 4 items convert.py ..FF ========================================= FAILURES ========================================== _____________________________________ test_fToC_boiling _____________________________________ def test_fToC_boiling(): > assert fToC(212.0)==pytest.approx(100.0) E assert 180.0 == 100.0 ± 1.0e-04 E + where 180.0 = fToC(212.0) E + and 100.0 ± 1.0e-04 = <function approx at 0x1026c40d0>(100.0) E + where <function approx at 0x1026c40d0> = pytest.approx convert.py:16: AssertionError _____________________________________ test_cToF_boiling _____________________________________ def test_cToF_boiling(): > assert cToF(100.0)==pytest.approx(212.0) E assert 132.0 == 212.0 ± 2.1e-04 E + where 132.0 = cToF(100.0) E + and 212.0 ± 2.1e-04 = <function approx at 0x1026c40d0>(212.0) E + where <function approx at 0x1026c40d0> = pytest.approx convert.py:19: AssertionError ============================ 2 failed, 2 passed in 0.03 seconds ============================= 169-231-175-204:lab01 pconrad$
Ok, let’s now break down this output.
Step 6: Understanding the output of pytest
Here’s how to understand
Get the big picture first from the convert.py ..FF line.
Look for a line near the beginning that has the name of your file, followed by a list of either dots, letter ‘E’ or letter ‘F’ characters, like this one:
In this case, the
.characters are tests that passed. If you have four tests, the ideal thing you’d want to see is convert.py …. which means that four tests for convert.py all passed.
Instead, here, we see
..FF, which means we had two test failures. Later in the output, we’ll see more detail about each of those failures.
Understand the overall structure of the output.
The rest of the output will be divided into sections, one for each failure. Here is what it look like with the details taken out so that you can see the big picture more easily:
==================================== test session starts ==================================== (blah blah here that you can ignore) convert.py ..FF ========================================= FAILURES ========================================== _____________________________________ test_fToC_boiling _____________________________________ ... (details about the first test case failure are here) ... _____________________________________ test_cToF_boiling _____________________________________ ... (details about the second test case failure are here) ... ========================= 2 failed, 2 passed in 0.03 seconds =============================
Note that the last line gives us a nice summary:
2 failed, 2 passed in 0.03 seconds. We now know that we need to focus on the two failures. And the headers tell us which test cases failed, namely
test_cToF_boiling. So let’s focus on those next, by first looking in detail at the first one:
Focus in on the first test case failure.
Let’s focus just on the detailed output for the first test case failure,
test_fToC_boiling. What does all of the detailed output mean?
In general, its a breakdown of why the assertion turned out to be false, showing every step in the calculation. Let’s break it down one line at a time:
line of output meaning
first line of the failing test case
E assert 180.0 == 100.0 ± 1.0e-04
This is the assertion that turned out not to be true
E + where 180.0 = fToC(212.0)
This tells us why
180.0was on the left hand side of the
==. It was the result of computing
E + and 100.0 ± 1.0e-04 = <function approx at 0x1026c40d0>(100.0)
This tells us why
100.0 ± 1.0e-04was on the right hand side of the
==. It shows the expected value (
100.0) and the tolerance (
E + where <function approx at 0x1026c40d0> = pytest.approx
This tells us that
pytest.approxwas used to calculate the tolerance.
This shows which line in the file
convert.pyhad the failed assertion, namely, line 16. That helps us find the error faster if we are dealing with a large file of code.
If we look at this, we can see that amidst all of the clutter is the crucial fact that
180.0when what we were expecting was
100.0, with a tolerance of
Step 7: Fixing the code
So, if you have failing test cases, the thing to do is fix the code so that the test cases pass.
To do that you’ll need to correct the forumla.
Keep in mind that in Python:
*symbol is used for multiplication. In algebra, we can write
x, however, this does not work in Python. In Python you must write
1.8 * xif you want to multiply the variable
-symbols are used for addition and subtraction
/symbol is used for division, e.g ‘9/5’ means nine divided by five.
Also, the order of operations in Python is that multiplication and division are done before addition and subtraction. Some examples:
xis 5, then
x + 2 * 3gives us 11, not 21. The multiplication is perfomed before the addition.
xis 16, then
x - 6 / 2gives us 13, not 5. The division is performed before the subtraction.
If you want to force the addition or subtraction to be done first, you must use parentheses, e. g.
(x + 2) * 3or
(x - 6) / 2
When you replace
return ftemp - 32.0 with the correct formula for
converting a Fahrenheit temperature to Celsius, you should leave out
the comment that says
# TODO: Fix this line of code .
You’ll also want to replace the similar line in the cToF function.
When you have the test cases passing, try running the pytest command again—remembering that:
- it must be done from the terminal shell, NOT the Python shell.
- the current working directory of that terminal session must be
the directory/folder where your
convert.pyfile is located
python3 -m pytest convert.py
When you see four passing tests, your output will look like this. Also, the last line will be a pleasant shade of green instead of an angry looking red.
169-231-175-204:lab01 pconrad$ python3 -m pytest convert.py ======================== test session starts ========================= platform darwin -- Python 3.6.2, pytest-3.2.1, py-1.4.34, pluggy-0.4.0 rootdir: /Users/pconrad/github/ucsb-cs8/Lecture5_0816/lab01, inifile: collected 4 items convert.py .... ====================== 4 passed in 0.01 seconds ====================== 169-231-175-204:lab01 pconrad$
At that point, you are ready to submit your work to submit.cs
Step 8: Submit your
convert.py file to submit.cs
EDIT: You will only see 20/20 points. The remaining 80 points will be graded by the TAs and final scores will be posted on Gauchospace.
To submit your file to submit.cs, you can visit this page:
Navigate to that page, and upload your
Or, if you are working on the ECI/CSIL/lab linux systems, you can also submit at the command line with this command, provided you are in the correct folder/directory:
~submit/submit -p 825 convert.py
The first time you use this method, it will ask for your email address: use your full umail address (e.g.
firstname.lastname@example.org). For password, use the password that you enter for the submit.cs system. You may save these credentials if you don’t want to have to type them in every time.